Introduction to Taiwan NCC Certification
NCC is an abbreviation of The National Communications Commission. It mainly controls the communication information equipment that circulates and uses in the Taiwan market:
1. LPE: Low Power Equator is a low-power device(eg Bluetooth, Wi-Fi);
2. TTE: Telecom Terminals Terminal is a communication terminal device(eg, mobile phones, tablets).
NCC certified product range
1. Low power radio frequency motor operating from 9kHz to 300 GHz, Such as: Wireless Network(WLAN) products(including IEEE 802.11 a / b/g), UNII, Bluetooth products, RFID, ZigBee, wireless keyboard, wireless mouse, wireless headphone microphone, radio walkie-talkie, radio remote control toys, various Radio remote control, various wireless Alarm guard and so on.
2. Public exchange of telephone network equipment(PSTN) products, Such as cable telephones(including VOIP network phones), automatic alarm equipment, telephone answering machines, fax machines, remote control devices, cable phone wireless master and secondary machines, key telephone systems, data equipment(including ADSL equipment), incoming display terminal equipment, 2.4 GHz RF telecommunications terminal equipment and so on.
3. Land mobile communication network equipment(PLMN) products, such as wireless broadband access action station equipment(WiMAX mobile terminal equipment), GSM 900/DCS 1800 mobile phone and terminal equipment(2G mobile phone), third-generation mobile communication terminal equipment(3G Mobile phone) and so on.
*
1. It shall be stamped or printed on the position of the equipment body in an appropriate proportion of size and size. There shall be no large or small size requirement, and the principle of clarity shall be taken as the principle.
2. This NCC logo, together with the qualifying number for the inspection, should be attached to the product as required. The frequency color is single and must be clear and easy to identify.
Examples of Production of Qualified Standards
In order to meet the needs of Taiwan's trade facilitation customs clearance, from January 1, 1995, the model of the conformity label for the examination of radio frequency equipment and telecommunications terminal equipment for telecommunications control was revised as follows: low-power radio frequency motor and wireless telecommunications terminal equipment that obtained the conformity number from the examination before December 31, 1994, It is necessary to convert the test qualified number to the new 95-year encoding method(customs clearance code).
NCC authentication process
1, the client provides product information to the agency to evaluate the quotation;
2, the client confirms the back signing quotation, fills in the application form, provides samples, information, arranges the payment(the first paragraph), the organization opens the case;
3, arrange the product forecast, and review the data;
4, if the test, data problems, arrange for rectification, retesting, until qualified;
5, after the test and data pass, the license issuing agency conducts a witness test;
6, after the completion of the sighting test, the issuing agency issued a test report and issued a certificate;
The Client pays off(the final payment), receives the certificate report, and closes the case.
Application for Taiwan NCC Certification Preparation Information
1. Product circuit diagram;
2. Product Box Chart;
3. Product specification;
4. Product specifications;
5. BOM table;
6. Service application form;
7. Factory ISO9001 certificate;
8. Antenna specification.
NCC Certification Application Cycle
NCC certification application cycle 3-4 weeks, the cost can be determined based on product information.
NCC Factory Inspection and Certificate Validity Period
There is no factory inspection for NCC certification. The certificate has no validity period. As long as there is no change in the product and the test standard is not updated, the certificate is always valid.
Comparative Analysis of Taiwan NCC Certification and BSMI Certification